ZXCT1041E5TA【PDF 9/12 页】IC CURRENT MONITOR 1% SOT23-5

ZXCT1041

Issue 2 - January 2008

www.zetex.com

?Zetex Semiconductors plc 2008

Application information

The ZXCT1041 uses two current monitors in anti-parallel to provide bidirectional current

measurement. The integrated resistors while having a broad actual value variance provide very

good matching to one another; this provides very tight gain matching from forward current

measurement to reverse current management and removes the need to trim the resistor values.

The internal transconductance setting resistors have a nominal value of 1.5k thereby setting the

internal transconductance to 0.67mA/V of V

SENSE-

. The outputs of both current monitors (current)

are summed into an internal common gain-setting resistor of 15k. This sets the overall gain to

10 which has a very small variance due to the very good matching of internal transistors.

To improve accuracy the offset of amplifier 1 is trimmed.

The direction of measured current flow is determined by comparing the voltages applied to the

bases of transconductance transistors (Q1 and Q2). For maximum versatility the flag output uses

an open collector; this allows the ZXCT1041 to monitor rails at a much higher potential than what

the flag output is interfacing to.

A common application for micro-power current monitors is measuring the discharge current of a

rechargeable lithium ion/polymer battery. The ZXCT1041 enables measuring both the charge and

discharge current into the battery and with its wide operating voltage of 2.5 to 20V enables it to

measure the currents in to/ out of up to 4 cells connected in series.

S+

S-

1.5k

OUT

Flag

GND

15k

发布紧急采购，3分钟左右您将得到回复。

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购